Superconducting six-axis accelerometer

A new superconducting accelerometer, capable of measuring both linear and angular accelerations, is under development at the University of Maryland. A single superconducting proof mass is magnetically levitated against gravity or any other proof force. Its relative positions and orientations with respect to the platform are monitored by six superconducting inductance bridges sharing a single amplifier, called the Superconducting Quantum Interference Device (SQUID). The six degrees of freedom, the three linear acceleration components and the three angular acceleration components, of the platform are measured simultaneously. In order to improve the linearity and the dynamic range of the instrument, the demodulated outputs of the SQUID are fed back to appropriate levitation coils so that the proof mass remains at the null position for all six inductance bridges. The expected intrinsic noise of the instrument is 4 x 10(exp -12)m s(exp -2) Hz(exp -1/2) for linear acceleration and 3 x 10(exp -11) rad s(exp -2) Hz(exp -1/2) for angular acceleration in 1-g environment. In 0-g, the linear acceleration sensitivity of the superconducting accelerometer could be improved by two orders of magnitude. The design and the operating principle of a laboratory prototype of the new instrument is discussed

Development of a sensitive superconducting gravity gradiometer for geological and navigational applications

A sensitive and stable gravity gradiometer would provide high resolution gravity measurements from space. The instrument could also provide precision tests of fundamental laws of physics and be applied to inertial guidance systems of the future. This report describes research on the superconducting gravity gradiometer program at the University of Maryland from July 1980 to July 1985. The report describes the theoretical and experimental work on a prototype superconducting gravity gradiometer. The design of an advanced three-axis superconducting gravity gradiometer is also discussed

Microbiological aspects of sterilization development laboratories

Report deals with an investigation of vertical laminar flow clean rooms for use in spacecraft assembly. A reduction of particulate and microbial contamination occurs in the application

The microbiological aspects of sterilization assembly development laboratories, EASL and SADL

Microbiological aspects of operations in two sterilization development laboratories for spacecraft assembl

Recent advances and future trends on plasticity and impact mechanics of ships and offshore structures

While in service, ships and offshore structures are likely subjected to various types of extreme and accidental events that essentially involve plasticity and impact issues. Ships and offshore structures are typical examples of thin-walled structures, but their environments in construction and operation are quite unique compared to other types of thin-walled structures. Those include welding induced high temperature causing initial imperfections (e.g., initial distortions, residual stress or softening in the heat-affected zones of welded aluminium structures); abnormal waves/winds/currents; dynamic pressure loads arising from sloshing, slamming or green water; low temperature in Arctic operations; cryogenic conditions resulting from liquefied natural gas cargo; ultra-high pressure in ultra-deep waters; elevated temperature due to fire; blast loads due to explosion; impact loads arising from collision, grounding or dropped objects; age-related degradation such as corrosion, fatigue cracking and local denting damage; and hull girder collapse or sinking. Such events sometimes result in catastrophic consequences that lead to casualties, property damage, and pollution. This paper presents recent advances and future trends with the focus on plasticity and impact mechanics of ships and offshore structures in association with extreme and accidental conditions

Three-Dimensional Thermo-Elastic-Plastic Finite Element Method Modeling for Predicting Weld-Induced Residual Stresses and Distortions in Steel Stiffened-Plate Structures

The objective of the present paper is to develop nonlinear finite element method models for predicting the weld-induced initial deflection and residual stress of plating in steel stiffened-plate structures. For this purpose, three-dimensional thermo-elastic-plastic finite element method computations are performed with varying plate thickness and weld bead length (leg length) in welded plate panels, the latter being associated with weld heat input. The finite element models are verified by a comparison with experimental database which was obtained by the authors in separate studies with full scale measurements. It is concluded that the nonlinear finite element method models developed in the present paper are very accurate in terms of predicting the weld-induced initial imperfections of steel stiffened plate structures. Details of the numerical computations together with test database are documented

Principles of structural safety studies

This chapter addresses principles of advanced structural safety studies in association with various types of extreme and accidental events. The structural consequences of extreme conditions and accidents are inevitably volatile, uncertain, complex, and ambiguous (VUCA). Methods to model random parameters affecting such extreme conditions and accidents are presented. The importance of limit states- and risk-based approaches is emphasized to manage VUCA environments. Future trends toward advanced structural safety studies are addressed

The ISSC 2022 committee III.1-Ultimate strength benchmark study on the ultimate limit state analysis of a stiffened plate structure subjected to uniaxial compressive loads

This paper presents a benchmark study on the ultimate limit state analysis of a stiffened plate structure subjected to uniaxial compressive loads, initiated and coordinated by the ISSC 2022 technical committee III.1-Ultimate Strength. The overall objective of the benchmark is to establish predictions of the buckling collapse and ultimate strength of stiffened plate structures subjected to compressive loads. Participants were asked to perform ultimate strength predictions for a full-scale reference experiment on a stiffened steel plate structure utilizing any combination of class rules, guidelines, numerical approaches and simulation procedures as they saw fit. The benchmark study was carried out blind and divided into three phases. In the first phase, only descriptions of the experimental setup, the geometry of the reference structure, and the nominal material specifications were distributed. In the second phase, the actual properties of the reference structure were included. In the third and final phase, all available information on the reference structure and measured properties were distributed, including the material properties and laser-scanned geometry. This paper presents the results obtained from seventeen submitted FE simulations as well as details on the experiment. It also presents comparisons of the force versus the displacement curve, failure modes and locations for each phase, among others, and a discussion on the participants’ ability to predict the characteristics of the reference experiment with the information that is available for the phase. The outcome of the study is a discussion and recommendations regarding the design of finite element models for the ultimate state analysis of stiffened plate structures, with emphasis on the prediction of the ultimate capacity, force-displacement curve, and failure mode and location related to access to data, uncertainties and modeling of the material properties, geometric imperfections and distortions, and residual stresses

Finite element modeling for the progressive collapse analysis of steel stiffened-plate structures in fires

In this study, novel honeycomb structures with twisted feature were designed and manufactured by laser powder bed fusion (LPBF). The manufacturability, microstructure evolution of LPBFed honeycomb components with twisted feature were studied. The influence of twist angle on the compressive behavior of components was experimentally investigated and the underlying mechanism was revealed using FE simulation. Results revealed that the material relative density of LPBFed components was reduced with the increase of twist angle, caused by the enlarging overhanging area. Different cooling rate of melt pool at different parts along the building direction resulted in different microstructures. The twist angle significantly affected the compressive behaviors of honeycomb structures. When the cell number along each side was 3, the honeycomb structure with 30° twist angle exhibited the most uniform stress distribution under compression, leading to the highest specific compressive strength and energy absorption ability. The influence of cell number and wall thickness on compressive properties of honeycomb structures with 30° twist angle were investigated through finite element simulation, and results revealed that the structure with 0.75 mm wall thickness and 3 unit cells along each side showed the highest specific energy absorption ability

Solidification of undercooled liquids

During rapid solidification processing (RSP) the amount of liquid undercooling is an important factor in determining microstructural development by controlling phase selection during nucleation and morphological evolution during crystal growth. While undercooling is an inherent feature of many techniques of RSP, the deepest undercoolings and most controlled studies have been possible in carefully prepared fine droplet samples. From past work and recent advances in studies of nucleation kinetics it has become clear that the initiation of crystallization during RSP is governed usually by heterogeneous sites located at surfaces. With known nucleant sites, it has been possible to identify specific pathways of metastable phase formation and microstructural development in alloys. These advances have allowed for a clearer assessment of the interplay between undercooling, cooling rate and particle size statistics in structure formation. New approaches to the examination of growth processes have been developed to follow the thermal behavior and morphology in small samples in the period of rapid crystallization and recalescence. Based upon the new experimental information from these studies, useful models can be developed for the overall solidification process to include nucleation behavior, thermodynamic constraints, thermal history, growth kinetics, solute redistribution and resulting structures. From the refinement of knowledge concerning the underlying factors that govern RSP a basis is emerging for an effective alloy design and processing strategy